Abdulazeez
عضو نشط
الســهم للمتابعه والرجـــاء أحد يعطينا شــرعيه السهم مع أني متخوف وحاس أن الشركه ممكن تكون مو شرعيه
EXX/A $2.9 REPORTED 19C/SHARE NET INCOME ...30% REVENUE INCREASE!!!! $10 STOCK
--------------------------------------------------------------------------------
EXX INC. (AMEX: EXXA...or EXX/A or EXX.A) REPORTED A BLOCKBUSTER 2ND QUARTER YESTERDAY...THE MARKET IS NOT FULLY AWARE OF THIS YET. EXXA WILL BE A $10++ STOCK SOON.
ONLY 3.8M SHARE FLOAT........0.25 P/S....60C - 80C/SHARE ANUALIZED NET INCOME....HUGE INSIDER BUYING
DAIMLERCHRYSLER IS NOW EXXA'S LARGEST CUSTUMER WITH TWO HUGE CONTRACTS ($45M/YR REVENUES)ANNOUNCED LAST YEAR. DCX PROFITS ARE STARTING SHOW UP BIG TIME IN THE TOP AND BOTTOM LINES. THIS IS THE FIRST OF SECERAL SIMILAR BLOCKBUSTER QUARTERS. THE ESTIMATED FULL YEAR NET INCOME IS 60 - 80C/SHARE.
2Q 2006 EARNINGS SUMMARY:
REVENUES: $43M .....vs. $37M....2ND QUARTER
NET INCOME: $2.14M OR 19C/SHARE..........vs. $0.7M LAST YEAR
2Q 2006 earnings link:
http://biz.yahoo.com/prnews/060814/dam020.html?.v=62
EXXA HIGHLIGHTS:
* LOW FLOAT = 4.7 MILLION SHARES
* 2005 REVENUES = $147 MILLION
* MARKET CAP = $36M
* P/S RATIO = 0.25
* 2006 NET INCOME = 22C/SHARE.....FIRST SIX MONTHS
* ESTIMATED FULL YEAR NET INCOME: 60C - 80C/SHARE
* O/S SHARES = 11.3 MILLION
* MARKET CAP = $40MILLION
* INSIDERS OWN 54% OF COMPANY
* HEAVY INSIDER BUYING
DaimlerChrysler is now Exx Inc.'s largest customer. The new DaimlerChrysler's contracts will represent about 30 % of the total projected $160M - $180M/year EXXA revenues in 2006.
EXXA has the potential to become the next BOOM. In 2005 Fortune Magazine ranks EXXA as No. 1 in revenue growth, and 8th overall, among America's fastest growing companies.
About The Two DaimlerChrysler Contracts (Per the 2005 10-K) :
..."In May 2005, the Company reported that one of the subsidiaries of Newcor received purchase orders from Daimler Chrysler Corporation ("DCX") to machine axles for two current powertrain programs. the anticipated sales would approximate a 20% increase over the Company's then sales and profitability on an annual basis.
In June 2005, the Company reported that a second subsidiary of Newcor had been awarded a machining program for a DCX powertrain. The annual sales of this program were estimated at approximately 10% of the Company's 2004 annual sales.
The most difficult part about investing in EXXA is to figure out the symbol used by the various brokers. Etrade and Ameritrade use EXX.A..........Scottrade uses EXX/A..... MerrillLynch uses EXX'A
EXXA's Chairman/CEO David Segal is very bullish about the future of EXXA's stock. He has recently added 102,700 shares to his 5M plus shares buying all those shares in the open market!!
http://www.sec.gov/Archives/edgar/da...amsched13d.txt
ABOUT EXXA:
Newcor, EXXA's largest division, was founded in 1933 as National Electric Welding Machines Company and changed its name to Newcor in 1969. EXXA snatched NEWCOR from BK in 2003. EXXA recently bought vinyl wallpaper maker Seller Brothers (S&B) from BK ofr $4M recently. EXXA expects S&B to be immediately acreetive to earnings and net income.
Newcor, Inc., owns several divisions employing over 1000 people worldwide in all areas of design, engineering, and manufacturing of a variety of products, principally for the automotive, heavy-duty, agricultural, industrial, and defense markets. Newcor reports its businesses under two product segments: Precision Machined Products and Rubber and Plastic Products. Newcor also operates the Bay City Division, which designs and builds state-of-art welding and forming equipment.
The following link describes some of Bay City Automotive-component development and production capabilities..
http://www.baycity.newcor.com/autocomp.htm
*** Always do your own DD and invest at your own risk.
--------------------------------------------------------------------------------
Last edited by 2kwillrock : Today at 05:20 PM.
--------------------------------------------------------------------------------
EXX INC. (AMEX: EXXA...or EXX/A or EXX.A) REPORTED A BLOCKBUSTER 2ND QUARTER YESTERDAY...THE MARKET IS NOT FULLY AWARE OF THIS YET. EXXA WILL BE A $10++ STOCK SOON.
ONLY 3.8M SHARE FLOAT........0.25 P/S....60C - 80C/SHARE ANUALIZED NET INCOME....HUGE INSIDER BUYING
DAIMLERCHRYSLER IS NOW EXXA'S LARGEST CUSTUMER WITH TWO HUGE CONTRACTS ($45M/YR REVENUES)ANNOUNCED LAST YEAR. DCX PROFITS ARE STARTING SHOW UP BIG TIME IN THE TOP AND BOTTOM LINES. THIS IS THE FIRST OF SECERAL SIMILAR BLOCKBUSTER QUARTERS. THE ESTIMATED FULL YEAR NET INCOME IS 60 - 80C/SHARE.
2Q 2006 EARNINGS SUMMARY:
REVENUES: $43M .....vs. $37M....2ND QUARTER
NET INCOME: $2.14M OR 19C/SHARE..........vs. $0.7M LAST YEAR
2Q 2006 earnings link:
http://biz.yahoo.com/prnews/060814/dam020.html?.v=62
EXXA HIGHLIGHTS:
* LOW FLOAT = 4.7 MILLION SHARES
* 2005 REVENUES = $147 MILLION
* MARKET CAP = $36M
* P/S RATIO = 0.25
* 2006 NET INCOME = 22C/SHARE.....FIRST SIX MONTHS
* ESTIMATED FULL YEAR NET INCOME: 60C - 80C/SHARE
* O/S SHARES = 11.3 MILLION
* MARKET CAP = $40MILLION
* INSIDERS OWN 54% OF COMPANY
* HEAVY INSIDER BUYING
DaimlerChrysler is now Exx Inc.'s largest customer. The new DaimlerChrysler's contracts will represent about 30 % of the total projected $160M - $180M/year EXXA revenues in 2006.
EXXA has the potential to become the next BOOM. In 2005 Fortune Magazine ranks EXXA as No. 1 in revenue growth, and 8th overall, among America's fastest growing companies.
About The Two DaimlerChrysler Contracts (Per the 2005 10-K) :
..."In May 2005, the Company reported that one of the subsidiaries of Newcor received purchase orders from Daimler Chrysler Corporation ("DCX") to machine axles for two current powertrain programs. the anticipated sales would approximate a 20% increase over the Company's then sales and profitability on an annual basis.
In June 2005, the Company reported that a second subsidiary of Newcor had been awarded a machining program for a DCX powertrain. The annual sales of this program were estimated at approximately 10% of the Company's 2004 annual sales.
The most difficult part about investing in EXXA is to figure out the symbol used by the various brokers. Etrade and Ameritrade use EXX.A..........Scottrade uses EXX/A..... MerrillLynch uses EXX'A
EXXA's Chairman/CEO David Segal is very bullish about the future of EXXA's stock. He has recently added 102,700 shares to his 5M plus shares buying all those shares in the open market!!
http://www.sec.gov/Archives/edgar/da...amsched13d.txt
ABOUT EXXA:
Newcor, EXXA's largest division, was founded in 1933 as National Electric Welding Machines Company and changed its name to Newcor in 1969. EXXA snatched NEWCOR from BK in 2003. EXXA recently bought vinyl wallpaper maker Seller Brothers (S&B) from BK ofr $4M recently. EXXA expects S&B to be immediately acreetive to earnings and net income.
Newcor, Inc., owns several divisions employing over 1000 people worldwide in all areas of design, engineering, and manufacturing of a variety of products, principally for the automotive, heavy-duty, agricultural, industrial, and defense markets. Newcor reports its businesses under two product segments: Precision Machined Products and Rubber and Plastic Products. Newcor also operates the Bay City Division, which designs and builds state-of-art welding and forming equipment.
The following link describes some of Bay City Automotive-component development and production capabilities..
http://www.baycity.newcor.com/autocomp.htm
*** Always do your own DD and invest at your own risk.
--------------------------------------------------------------------------------
Last edited by 2kwillrock : Today at 05:20 PM.
