قاروه
بوعبدالعزيز
- التسجيل
- 22 نوفمبر 2005
- المشاركات
- 7,976
دورة المؤشرنت للتحليل الفني
50 دينار كويتي
قاروه يطلب فزعتكم يا اعضاء المؤشر نت
- بادئ الموضوع قاروه
- تاريخ البدء
sa3od29
عضو نشط
حتى انا بعد...واذا ظغطت يس او نو ....تعلق الصفحه كلش
قاروه
بوعبدالعزيز
- التسجيل
- 22 نوفمبر 2005
- المشاركات
- 7,976
MOHAMMED11
عضو نشط
ماعندي حل صراحه
بس اعتقد ان في فايروس بجهازك
دام السالفه فيها تعليق ،، تعليق معناته فايروس
بس اعتقد ان في فايروس بجهازك
دام السالفه فيها تعليق ،، تعليق معناته فايروس
قاروه
بوعبدالعزيز
- التسجيل
- 22 نوفمبر 2005
- المشاركات
- 7,976
sa3od29
عضو نشط
لا انا اعتقد انه تحديث حق الاكسبلور بس مو فايروس لان لاب توب مالي جديد وفيه حماية
قاروه
بوعبدالعزيز
- التسجيل
- 22 نوفمبر 2005
- المشاركات
- 7,976
طيب لو تحديث ليش بس مع الايميل !
MOHAMMED11
عضو نشط
جربت تبطله من جهاز غير جهازك ؟!!!
sa3od29
عضو نشط
ايه جربت وهم نفس الشي طلع لي
Volcano
عضو نشط
- التسجيل
- 15 مايو 2007
- المشاركات
- 342
السلام عليكم ...
نبي الفزعه ياشيبان و شباب المؤشر
يا اخوان كل ما افتح الايميل (الهوتميل) تطلعلي هالرساله و الحل ؟
صارلي اسبوع على هالحاله
والمشكله مو قادر اتابع الرسايل
ضغطت يس ماكو فايده ونوو هم بعد ماكو فايده دايما تعلق الصفحه !
وعلى نياتكم ترزقون .... مع تحياتي واحترامي الشديد لك أخوي العزيز ...
على راي واحد من أعضاء المنتدى يقول قاروه قاعد لنا على الحرف والكلمه ...
والله مو قصدي شي .... مع تحياتي واحترامي لك وللجميع
وانشاء الله تلاقي حل لمشكلتك ....
وتفضل بقبول فائق التحيه والاحترام ،،،
تلميذ المؤشر
مشرف قسم الإستراحه
المشكلة معروضة في صفحة مايكروسوفت
How to set time-out period for script
View products that this article applies to.
Article ID : 175500
Last Review : November 2, 2006
Revision : 3.0
This article was previously published under Q175500
SUMMARY
Important This article contains information about how to modify the registry. Make sure to back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/) Description of the Microsoft Windows registry
Because some scripts may take an excessive amount of time to run, Internet Explorer prompts the user to decide whether they would like to continue running the slow script. Some tests and benchmarks may use scripts that take a long time to run and may want to increase the amount of time before the message box appears. In Internet Explorer, the script time-out value can be changed on specific client machines by modifying a registry entry.
MORE INFORMATION
There are situations when a Web page contains script that takes an unusually long time to run. If you are scripting an ActiveX control on a Web page to transfer a very large file or do a large database query, this will often cause a significantly long delay. Internet Explorer 3.02 detects the long delay and prompts the user with a dialog box reading the following:
This page contains a script which is taking an unusually long time to finish. To end this script now, click Cancel.
The equivalent message box for Internet Explorer versions 4.0, 5.0, 6, and 7 reads:
A script on this page is causing Internet Explorer to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?"
This mechanism allows the user to stop misbehaved script that runs into an endless loop or otherwise is performing slowly.
In Internet Explorer 3.02, this message box can appear on machines running Windows 95. The version 3.02 browser is specifically looking to see if the script thread has pumped any windows messages in the last five seconds. There is no way to override this time-out period for Internet Explorer 3.02. If you are using an ActiveX control with long blocking operations, that ActiveX control should either employ an event mechanism and return control to the caller or call PeekMessage every five seconds to reset the time-out.
As of Internet Explorer 4.0, 5.0, 6, and 7, the time-out is no longer a fixed value based on Windows messages. Internet Explorer now tracks the total number of executed script statements for the current page with the script engine and throws up the time-out dialog box when that value hits a threshold amount.
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
To change this time-out value in Internet Explorer 4.0, 5.0, 6, or 7, follow these steps: 1. Using a Registry Editor such as Regedt32.exe, open this key:
HKEY_CURRENT_USER\Software\Microsoft\InternetExplorer\Styles
Note If the Styles key is not present, create a new key that is called Styles.
2. Create a new DWORD value called "MaxScriptStatements" under this key and set the value to the desired number of script statements.
By default the key doesn't exist. If the key has not been added, Internet Explorer 4 defaults to 5,000,000 statements executed as the trigger for the time-out dialog box.
Because the Internet Explorer 4.0, 5.0, 6, and 7 time-out is based on the number of script statements executed, the time-out dialog box will not display during ActiveX control or database-access delays. Endless loops in script will still be detected.
قريته والي فهمته انك:
لازم تدخل الريجيستري بالذهاب الى Start ثم Run ثم كتابة Regedit
ثم البحث عن هذا المكان
HKEY_CURRENT_USER\Software\Microsoft\InternetExplorer\Styles
احتمال كبير انك ما اتحصل Styles موجود داخل InternetExplorer فالبتالي لازم تعمله ...اتحط السهم داخل InternetExplorer ورايت كليك create a new key ....وبعدها هم راح اتسوي داخله DWORD value called "MaxScriptStatements وقيمته الافتراضي 5 ملايين
بس عاد اظن على ما فهمته انك تزيد بالقيمة اذا ما ضبط وياك
ملاحظة: العمل على الريجيستري فيه مخاطرة كبيرة اذا ما اتعاملت فيه بطريقة حذرة....انا ما جربت المكتوب بس قريته واتعامل مع الريجيستري عادة...
موفق ان شاء الله قاروه
How to set time-out period for script
View products that this article applies to.
Article ID : 175500
Last Review : November 2, 2006
Revision : 3.0
This article was previously published under Q175500
SUMMARY
Important This article contains information about how to modify the registry. Make sure to back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/) Description of the Microsoft Windows registry
Because some scripts may take an excessive amount of time to run, Internet Explorer prompts the user to decide whether they would like to continue running the slow script. Some tests and benchmarks may use scripts that take a long time to run and may want to increase the amount of time before the message box appears. In Internet Explorer, the script time-out value can be changed on specific client machines by modifying a registry entry.
MORE INFORMATION
There are situations when a Web page contains script that takes an unusually long time to run. If you are scripting an ActiveX control on a Web page to transfer a very large file or do a large database query, this will often cause a significantly long delay. Internet Explorer 3.02 detects the long delay and prompts the user with a dialog box reading the following:
This page contains a script which is taking an unusually long time to finish. To end this script now, click Cancel.
The equivalent message box for Internet Explorer versions 4.0, 5.0, 6, and 7 reads:
A script on this page is causing Internet Explorer to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?"
This mechanism allows the user to stop misbehaved script that runs into an endless loop or otherwise is performing slowly.
In Internet Explorer 3.02, this message box can appear on machines running Windows 95. The version 3.02 browser is specifically looking to see if the script thread has pumped any windows messages in the last five seconds. There is no way to override this time-out period for Internet Explorer 3.02. If you are using an ActiveX control with long blocking operations, that ActiveX control should either employ an event mechanism and return control to the caller or call PeekMessage every five seconds to reset the time-out.
As of Internet Explorer 4.0, 5.0, 6, and 7, the time-out is no longer a fixed value based on Windows messages. Internet Explorer now tracks the total number of executed script statements for the current page with the script engine and throws up the time-out dialog box when that value hits a threshold amount.
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
To change this time-out value in Internet Explorer 4.0, 5.0, 6, or 7, follow these steps: 1. Using a Registry Editor such as Regedt32.exe, open this key:
HKEY_CURRENT_USER\Software\Microsoft\InternetExplorer\Styles
Note If the Styles key is not present, create a new key that is called Styles.
2. Create a new DWORD value called "MaxScriptStatements" under this key and set the value to the desired number of script statements.
By default the key doesn't exist. If the key has not been added, Internet Explorer 4 defaults to 5,000,000 statements executed as the trigger for the time-out dialog box.
Because the Internet Explorer 4.0, 5.0, 6, and 7 time-out is based on the number of script statements executed, the time-out dialog box will not display during ActiveX control or database-access delays. Endless loops in script will still be detected.
قريته والي فهمته انك:
لازم تدخل الريجيستري بالذهاب الى Start ثم Run ثم كتابة Regedit
ثم البحث عن هذا المكان
HKEY_CURRENT_USER\Software\Microsoft\InternetExplorer\Styles
احتمال كبير انك ما اتحصل Styles موجود داخل InternetExplorer فالبتالي لازم تعمله ...اتحط السهم داخل InternetExplorer ورايت كليك create a new key ....وبعدها هم راح اتسوي داخله DWORD value called "MaxScriptStatements وقيمته الافتراضي 5 ملايين
بس عاد اظن على ما فهمته انك تزيد بالقيمة اذا ما ضبط وياك
ملاحظة: العمل على الريجيستري فيه مخاطرة كبيرة اذا ما اتعاملت فيه بطريقة حذرة....انا ما جربت المكتوب بس قريته واتعامل مع الريجيستري عادة...
موفق ان شاء الله قاروه
sa3od29
عضو نشط
قااااروه
كمبيوتر بط جبدي شوف لي حل يبا...انا دشيت الموقع وطلع بالانجليزي كله...ومثلك عارف انا لغتي اسبنيووول
الوندز مال الاب توب مالي فيزتا باسك...شلون الطريقه علمنا ماقدر افتح ايميلي كلش الحين مادري شفيه
كمبيوتر بط جبدي شوف لي حل يبا...انا دشيت الموقع وطلع بالانجليزي كله...ومثلك عارف انا لغتي اسبنيووول
الوندز مال الاب توب مالي فيزتا باسك...شلون الطريقه علمنا ماقدر افتح ايميلي كلش الحين مادري شفيه
دورة المؤشرنت للتحليل الفني
50 دينار كويتي